Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning & Sweep Cost in Spokane Valley?
A standard chimney sweep in Spokane Valley typically costs $150 to $290, and most homes land near $190 for a single flue on a wood-burning fireplace. A sweep paired with a Level 2 inspection usually runs $280 to $490. Add-ons like a cap, crown work, or liner repair push the job higher, and the written estimate you get before work starts is what sets the final price.
Pricing here is shaped by the weather and the housing stock more than most homeowners expect. Spokane Valley sits in a cold inland valley where winter inversions trap wood smoke close to the ground, and the 2026 residential wood smoke rules that govern burning days mean a lot of fireplaces sit idle for stretches, then get worked harder when the air clears. That stop-and-go pattern leaves creosote to harden in layers, which is one reason a sweep in Spokane Valley isn’t always a quick brush-and-go.
Chimney Cleaning & Sweep Cost Breakdown (2026)
Here’s what the line items look like in the Spokane Valley market. These are typical ranges, not quotes, and the written estimate is what sets your actual price.
| Service | Typical Cost Range |
|---|---|
| Standard sweep, single flue (wood-burning fireplace or insert) | $150 – $290 |
| Sweep plus Level 1 inspection | $200 – $350 |
| Sweep plus Level 2 inspection (camera) | $280 – $490 |
| Second flue or second appliance | $75 – $160 |
| Gas appliance flue sweep (gas insert, gas furnace flue) | $120 – $220 |
| Oil furnace flue cleaning | $130 – $250 |
| Heavy creosote removal (glazed third-degree buildup) | $275 – $550 |
| Chimney cap installation | $175 – $425 |
| Crown repair or rebuild | $275 – $700 |
| Flue relining (DuraFlex system, per flue) | $2,200 – $4,900 |
| HeatShield flue resurfacing | $1,400 – $3,200 |
The spread inside these ranges comes down to a handful of things: how many flues you have, how much creosote has built up, roof pitch and access, and whether the inspection turns up a problem that has to be fixed before the chimney is safe to use. A one-story ranch on a low-pitch roof with a clean liner sits at the bottom of the range. A two-story home with a steep roof, a tight flue, and a decade of glazed creosote sits near the top.
We work with professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Those are the products a specialist specifies for liners, flue resurfacing, caps, chase covers, and venting. If your repair quote references a hardware-store liner, ask why.
What Affects Chimney Cleaning & Sweep Pricing in Spokane Valley
- How much creosote is in the flue. Light soot brushes out fast. Glazed, tar-like creosote that hardens over a winter of cold snaps and idle-burning days takes more time and different tools, and it can add $100 or more to a sweep.
- Number of flues and appliances. A chimney can serve a fireplace, a wood stove, a gas insert, and a furnace flue all in one structure. Each one is cleaned and inspected separately, so most homes in Spokane Valley with both a fireplace and a furnace flue land in the middle of the range.
- The appliance type. A gas insert or gas furnace flue is a different job than a wood-burning fireplace. Gas flues are cleaned and inspected for different failure points, and oil furnace flues leave a different residue that needs its own handling.
- Roof access and height. Low-pitch roofs and single-story homes are faster to work on. Steep pitches, tall chimneys, or a chimney boxed in tight against the roof line mean more setup time, which shows up in the estimate.
- What the inspection finds. A sweep is a cleaning. An inspection is a diagnosis. When the camera finds a cracked tile, a gap in the liner, or a failing crown, that’s a separate repair line, and we tell you what it costs before anything is touched.
- Burning habits and burn bans. Spokane Valley’s air quality rules mean some households burn in bursts rather than steadily. A fireplace that sits cold for weeks and then gets a hot fire can build creosote in uneven layers, which sometimes means a heavier sweep than the homeowner expected.
How to Save on Chimney Cleaning & Sweep
You don’t need to chase the lowest bid to save money. A few habits keep cost down and keep your chimney serving you longer:
- Burn dry, seasoned wood. Wet wood smokes more and leaves more creosote. Dry wood burns cleaner and means a lighter, faster sweep next time.
- Sweep on a regular rhythm. For a fireplace used through the winter, an annual sweep and inspection catches small problems before they become liner or crown repairs. A $200 sweep is a lot cheaper than a reline.
- Bundle the sweep with the inspection. Having both done in one visit is almost always cheaper than scheduling them separately.
- Address the cap early. A missing or damaged cap lets rain and birds in, which drives moisture problems and adds repair cost. A cap from Gelco or Famco is an inexpensive fix compared to water damage.
- Get a written estimate first. Any price you hear over the phone is a guess until someone is on the roof. Our estimates are free and the written estimate sets the final price. Call (844) 734-4138 to book one.
Why Chimney Pricing in Spokane Valley Looks Different
Spokane Valley is a wood-burning town in a cold inland valley, and that shapes the work. Many homes here have real fireplaces and wood stoves, not decorative gas logs, so creosote loads run heavier than in milder markets. The valley also traps cold air in winter, and the regional wood smoke rules limit burning on poor-air days, so fireplaces get used in bursts. A chimney that goes cold and then hot repeatedly can build creosote in dense layers, which is why a sweep here sometimes runs longer than the homeowner expected.
That matters for pricing because the sweep is the easy part to quote and the hard part to predict. When we’re on your roof, we see what the brush pulls out. If it’s light soot, we’re at the low end of the range. If it’s glazed and stubborn, we tell you before we go further. Same with the inspection: a camera run down the flue is how we know whether the liner is sound, whether a HeatShield resurfacing will solve the problem, or whether a DuraFlex reline is the right call. We don’t quote repairs off a guess.
If we do find liner damage, HeatShield and DuraFlex capability means the fix happens in the same relationship. You’re not handed off to a second contractor who quotes the job blind. One team sweeps, inspects, and repairs. That’s the whole reason we keep those three services under one company. From sweep to repair, handled by the same team.
Is It Cheaper to Repair or Replace a Chimney in Spokane Valley?
For most homes, repair is cheaper than rebuilding, and the deciding factor is whether the flue liner and structure are still sound. A flue that’s intact but has a cracked crown or a worn cap is a few hundred dollars to fix. A flue that’s cracked through or unlined is a reline, which typically runs $2,200 to $4,900 with a DuraFlex system. A full chimney rebuild sits far above that, so the inspection is what tells you which lane you’re in. If you’re weighing this, start with a sweep and inspection before you commit to anything. Call (844) 734-4138 and we’ll get you a written estimate.
How Often Should You Have Your Chimney Swept in Spokane Valley?
Once a year for a fireplace you burn regularly is the standard most chimney specialists recommend, and Spokane Valley’s cold-season burn patterns make an annual sweep and inspection the right rhythm for most homes. If you burn heavily through the winter, twice a year may be the better call. If your fireplace sits idle most of the year, a yearly inspection still pays off because it catches cap and crown wear before moisture gets in. A clean chimney is the starting point, not the finish line. Call (844) 734-4138 to schedule.
Can You Come Today for a Sweep?
Same-day service depends on the day’s schedule, so call and we’ll tell you what’s open. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Free estimates are available before any work starts. Call (844) 734-4138.
FAQs – Chimney Cleaning & Sweep Cost
How much does a chimney sweep cost in Spokane Valley?
A standard chimney sweep in Spokane Valley runs $150 to $290 for a single flue, with most homes near $190. A sweep plus a Level 2 camera inspection is typically $280 to $490. Add-ons like a second flue, a cap, or heavy creosote removal add to that. Call (844) 734-4138 for a free estimate – the written estimate sets the final price.
Does chimney cleaning cost more with heavy creosote?
Yes. Light soot cleans up fast, while glazed, hardened creosote can add $100 or more to a sweep, putting the job in the $275 to $550 range. The buildup is common in Spokane Valley because burn bans and cold snaps mean fireplaces get used in bursts rather than steadily. Call (844) 734-4138 for an exact quote on yours.
Should I get a Level 1 or Level 2 inspection with my sweep?
A Level 2 inspection with a camera is the right choice when you’ve changed appliances, had a chimney fire, moved into a new home, or haven’t had the flue inspected in years – and it adds roughly $80 to $200 to the sweep. A Level 1 visual check is fine for routine upkeep on a chimney with a known history. We inspect before we recommend, so you’ll know which one fits. Call (844) 734-4138.
How much does chimney relining cost in Spokane Valley?
Flue relining with a DuraFlex system typically runs $2,200 to $4,900 per flue. HeatShield flue resurfacing, which restores a liner that’s still structurally sound, is usually $1,400 to $3,200. Which one you need depends on what the camera finds. Call (844) 734-4138 for a free estimate and we’ll explain the difference before any work starts.
Why does chimney cleaning cost more in some Spokane Valley homes than others?
Access, appliance type, and creosote load drive the difference. A single-story home with a low-pitch roof and a clean flue is a faster job. A two-story home with a steep roof, a tight flue, or glazed creosote is at the top of the range. The written estimate you get after we’re on the roof is what sets the price. Call (844) 734-4138 to book one.
Where to Learn More
The sweep is one part of keeping a chimney working. When you’re ready to understand the whole picture, the Bellmont Chimney Sweep page walks through all three services, and the Spokane Valley page covers how those services apply here. You can also read up on how a sweep differs from an inspection, what triggers a reline, and how flue resurfacing works, so you walk into the estimate knowing what you’re buying.
Book Your Spokane Valley Sweep
Our technicians have up to experience, and they inspect before they recommend, so you’re never guessing at what your chimney needs. We use professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because those are what professionals specify. Estimates are free, and the written estimate sets the final price. Call (844) 734-4138 to book your chimney cleaning in Spokane Valley. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Pricing reflects the Spokane Valley market as of 2026. Bellmont Chimney Sweep offers free estimates – call (844) 734-4138.
Written by the team at Bellmont Chimney Sweep.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jennifer Delaney"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Danielle Parker"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Jodi Vaughn