Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Spokane Valley?
A chimney cap installed in Spokane Valley typically costs $175 to $450, and a crown repair or rebuild generally runs $300 to $1,200, depending on size and condition. A straightforward crown crack repair usually lands at $300 to $550, while a full crown rebuild on a masonry chimney falls between $600 and $1,200. Most single-cap jobs finish the same day, and the written estimate you receive before any work begins sets the final price.
We’re Bellmont Chimney Sweep, and cap and crown work is one of the three services we handle alongside chimney sweeping and chimney inspection. That’s not a small thing: the cap and crown sit at the very top of the system, and the person who inspects your flue from below is usually the same person who needs to go up top and look at them. Having sweep, inspection, and repair under one company means the diagnosis and the fix come from the same team.
Key Takeaways
- Chimney cap installation in Spokane Valley: roughly $175 to $450 for most single-flue chimneys.
- Crown crack repair: roughly $300 to $550; full crown rebuild: roughly $600 to $1,200.
- Custom or multi-flue caps cost more because they’re fabricated to fit, not bought off a shelf.
- We use professional-grade products from Gelco, Famco, Copperfield, HeatShield, DuraFlex, and Olympia Chimney on cap, crown, and flue work.
- Our technicians have up to experience, and estimates are free.
Chimney Cap & Crown Cost Breakdown (2026)
The ranges below reflect what homeowners in the Spokane Valley market can expect for common cap and crown jobs in 2026. These are typical estimates, not exact quotes. Your written estimate is what determines the final price, because every chimney is a slightly different animal.
| Job | Typical Estimated Range | What’s Usually Involved |
|---|---|---|
| Standard single-flue cap (galvanized or stainless) | $175 – $350 | Fitting and securing a stock cap over one flue tile |
| Multi-flue or custom cap | $350 – $750 | Fabricated to match the footprint of two or more flues |
| Full-coverage chase cover (for factory-built or metal chimneys) | $300 – $650 | Custom-sized cover that spans the whole chase top |
| Crown crack repair with sealant | $300 – $550 | Cleaning, filling, and sealing hairline or moderate cracks |
| Crown rebuild (full replacement over the flue) | $600 – $1,200 | Removing damaged mortar, forming, and finishing a new crown |
| Crown rebuild plus cap installation together | $650 – $1,400 | Combined job, often the most cost-effective way to do both |
What pushes a job toward the top of those ranges? Size is the first driver: a large masonry chimney with a wide crown needs more material and more time than a compact single-flue stack. Access is the second. A chimney on a steep roof or one with a tile roof that’s easy to crack underfoot takes longer to approach safely, and that labor shows up in the estimate. Third is condition. A crown with surface crazing is a quick seal job. A crown that’s separated from the flue, letting water pour in behind it, needs to come off and be rebuilt. The cap material matters too: a stainless cap with a lifetime finish costs more up front than galvanized, but it won’t rust out. And if the inspection turns up a damaged flue liner, that’s a separate line item, usually handled with a DuraFlex liner system rather than patched around.
What Affects Chimney Cap & Crown Pricing in Spokane Valley
Spokane Valley sits in a high-desert valley where summers are dry and hit triple digits, then winters swing into hard freezes. That cycle does more damage to crowns than most homeowners realize. The crown is a mortar cap that sheds water away from the flue, and when water soaks into it and then freezes overnight, it flexes and cracks. A cracked crown lets water run down into the chimney structure, and once that water freezes inside brick and mortar, the damage gets expensive fast. Here’s what actually moves the price on a Spokane Valley job:
- Freeze-thaw damage. The valley’s winter freeze cycles are the main reason crowns fail here. A crown that cracked over one winter may need rebuilding rather than sealing, which is the bigger line item.
- Chimney type and material. A masonry chimney with a poured concrete crown prices differently than a factory-built stainless or metal chimney, which usually takes a full-coverage chase cover instead.
- Number of flues. A single-flue chimney is the least expensive to cap. Add a second or third flue for a fireplace plus a furnace, and the cap has to be custom-fabricated, which raises the cost.
- Roof pitch and access. Steeper roofs, low-clearance areas, and delicate roofing materials all add time to reach and secure the work area safely.
- Condition of the flue below. If the crown’s been leaking for a while, the flue liner or the top courses of brick may be damaged. That work is assessed and priced separately, and skipping it means the new crown sits on a compromised chimney.
- Cap materials and features. Galvanized steel is the economical choice. Stainless steel lasts longer. Adding a spark arrestor screen or a wind-resistant design for exposed rooftops common in the valley also nudges the price up.
A well-kept crown is the difference between a chimney that sheds water and one that drinks it. That’s why every cap and crown job starts with a look at the whole top of the chimney, not just the part you called about. We inspect before we recommend.
How to Save on Chimney Cap & Crown
The best way to keep the bill low is to catch a crown problem before it reaches the brick. A crown crack that gets sealed early stays a $300 to $550 job. That same crack left through two winters can mean water damage to the masonry below, and rebuilding a crown over damaged brick costs more than catching it in time. A few practical moves:
- Do the cap and crown in one visit. If both need attention, bundling them into a single estimate usually costs less than scheduling two separate jobs.
- Choose stainless over galvanized when it makes sense. A stainless cap costs more up front, but it won’t rust through, so you’re not paying for the same job twice.
- Get a chimney inspection before you commit. Knowing the true condition of the flue, crown, and cap means you’re replacing only what’s actually worn out, not guessing.
- Don’t wait out the winter. If you see cracking or crumbling mortar on the crown before the first freeze, seal it then. Cold weather work on a failing crown only gets more expensive.
Our estimates are free, and there’s no charge for the look up top that tells you what you’re actually dealing with. Call (844) 734-4138 and we’ll get it on the schedule.
Can a Chimney Cap and Crown Be Fixed the Same Day?
Yes, most cap installations and many crown repairs can be completed in a single visit. A standard cap fit or a straightforward crown seal usually takes a couple of hours. A full crown rebuild or a custom-fabricated multi-flue cap can run longer and may need a return visit once the material is formed and cured, so we schedule it properly rather than rushing the cure. If you’re wondering whether your cap and crown can be handled in one go, call (844) 734-4138 and we’ll tell you straight before we book the work.
How Do You Know If You Need a Cap, a Crown, or Both?
If water is coming down the chimney and you don’t have a cap, that’s your answer. A chimney cap keeps rain, snow, birds, and debris out of the open flue, and it’s the cheapest protection you can add. A crown is a different problem: it’s the mortar top that seals the chimney’s masonry and sheds water away from the flue tile. When the crown cracks, water gets into the chimney structure itself, not just down the flue. Homeowners often call about one and learn they need the other, which is exactly why we inspect the full top before recommending anything. We won’t sell you a cap you don’t need or a rebuild when a repair will hold. Call (844) 734-4138 for a free look.
Do I Really Need a Fireplace Cap in Spokane Valley?
Yes, in most cases, and especially for a wood-burning fireplace you actually use. Without a cap, the open flue becomes a rain and snow funnel in winter, and it’s an open door for birds and squirrels that nest in chimneys across the valley. A cap with a spark arrestor screen also keeps embers off the roof, which is worth having on a dry summer day. The cost of a standard cap, roughly $175 to $350, is far less than dealing with a water-damaged flue or a nest blocking your draft. If you’re not sure whether you have one, we can check during any sweep. Call (844) 734-4138 and we’ll set it up.
Why Do Spokane Valley Chimney Crowns Crack So Often?
The freeze-thaw cycle is the main reason. Winter days often warm above freezing and nights drop well below it, so any water sitting in a porous mortar crown expands as it freezes and pulls the crown apart from the inside. The valley’s dry summers and sudden cold snaps accelerate it. A crown that’s properly sloped away from the flue and sealed with a product like those from HeatShield or Copperfield sheds that water and lasts far longer than a flat, unsealed one. If your crown is cracking, sealing or rebuilding it before winter is the move. Call (844) 734-4138 for a free estimate.
Does a Capped Chimney Still Need Sweeping and Inspection?
Yes. A cap keeps out water, animals, and debris, but it doesn’t stop creosote and soot from building up inside the flue as you burn. A capped chimney on a working fireplace still needs regular sweeping and a chimney inspection to keep the flue safe and to check that the cap and crown are still doing their job. A clean chimney is the starting point, not the finish line. Our technicians have up to experience and can sweep, inspect, and repair the cap and crown in one relationship. Call (844) 734-4138 to book a sweep and inspection.
Why Bellmont Chimney Sweep Handles Cap and Crown Work
Cap and crown work is small but it sits at the top of the whole system, and it’s easy to get wrong when it’s tacked onto a general handyman’s list. We do three things and we do them as one company: chimney sweeping, chimney inspection, and chimney repair. That means the tech who inspects your flue and spots a hairline crack in the crown is part of the same team that comes back to repair or rebuild it, with no hand-off to a second contractor and nobody pointing fingers if something’s not right.
We use professional-grade repair materials, not whatever’s on the hardware store shelf. Gelco, Famco, and Copperfield cover our cap, chase cover, and venting components. HeatShield handles flue resurfacing and crown restoration work. DuraFlex and Olympia Chimney cover liner systems when the crown repair reveals a damaged flue that needs relining. Those are the same lines certified chimney specialists use across the country, and they’re what we sign our work with. If the flue needs a new liner as part of the job, we handle that in-house with DuraFlex rather than sending you elsewhere. From sweep to repair, it’s handled by the same team.
Our technicians have up to experience, and our estimates are free. We inspect before we recommend, so the price you see reflects what your chimney actually needs. That’s the standard we hold to anywhere in Spokane Valley, from a simple cap fit to a full crown rebuild over a damaged flue. Learn more about Bellmont Chimney Sweep and how our three services fit together.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Spokane Valley? A standard single-flue chimney cap typically costs $175 to $350 installed in Spokane Valley, and a multi-flue or custom cap runs $350 to $750. The material matters: galvanized is the economical choice, stainless costs more but lasts longer. Call (844) 734-4138 for an exact quote; estimates are free.
How much does a chimney crown rebuild cost in Spokane Valley? A full crown rebuild generally runs $600 to $1,200, while a smaller crack repair with sealant costs around $300 to $550. A rebuild is needed when the crown has separated from the flue or the mortar has broken down past sealing. Call (844) 734-4138 for an exact quote; estimates are free.
Is it cheaper to repair or replace a chimney crown? Repair is cheaper when the damage is hairline cracking that can be cleaned and sealed, usually $300 to $550. A rebuild is the better value when the crown is crumbling, badly sloped toward the flue, or letting water into the masonry, because a seal won’t hold over a failing base. Call (844) 734-4138 for an honest assessment; estimates are free.
Can you come today to look at my chimney cap or crown? We offer same-day service and fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 734-4138 and we’ll get you on the schedule.
Do I need a cap and crown repair together? Often yes, because both sit at the top and fail for the same reasons. Doing them in one visit, typically $650 to $1,400 combined, usually costs less than two separate jobs. Our tech will check both in a single inspection so you’re only paying for what’s actually needed. Call (844) 734-4138 for a free estimate.
What Happens When You Call
You tell us what you’re seeing, we ask a few questions about the chimney and how you use it, and we set a time for a technician to come out and inspect the top of the chimney. You get a written estimate with the cap and crown work itemized and priced before anything begins. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Call (844) 734-4138 today for a free estimate, and we’ll handle the cap and crown so your chimney sheds water the way it should.
Pricing reflects the Spokane Valley market as of 2026. Bellmont Chimney Sweep offers free estimates – call (844) 734-4138.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jennifer Delaney"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Danielle Parker"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Jodi Vaughn