Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Spokane Valley?
Chimney liner replacement in Spokane Valley typically runs $2,200 to $5,800 depending on flue height, liner material, and whether the chimney needs a full rebuild. A partial chimney rebuild usually falls between $2,800 and $9,000, and a full top-to-bottom rebuild of a badly damaged stack can reach $12,000 or more. Those are typical estimates only – the written estimate we prepare after inspecting your chimney sets the final price, and the estimate itself is free.
Spokane Valley chimneys take a specific kind of beating. The valley’s cold winters, hard freeze-thaw swings, and dry summers work masonry and clay tile flues hard, and a lot of the housing stock here has chimney systems that were built decades ago and have never had a liner upgrade. When we inspect, we’re looking at three things at once: whether the flue is sound enough to keep, whether it needs resurfacing or relining, and whether the exterior masonry has moved past what a repair can fix. Those answers drive the price more than anything else.
Key Takeaways
- Liner installation in Spokane Valley is typically $2,200-$5,800; rebuilds start around $2,800 and climb with the amount of masonry involved.
- Stainless liners (DuraFlex) and HeatShield resurfacing solve different problems – the inspection decides which one your chimney actually needs.
- Crown, cap, and flashing work is often the cheapest part of the job and the most important for stopping water damage.
- A free estimate gives you a real number instead of a guess, and we inspect before we recommend anything.
- Call (844) 734-4138 – we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items usually shake out for a chimney liner or rebuild job in the Spokane Valley market this year. Every chimney is different, so treat these as typical ranges rather than a quote for your house.
| Work item | Typical 2026 range | What it covers |
|---|---|---|
| Stainless steel liner – single-story flue | $2,200 – $3,400 | DuraFlex liner sized to the appliance, insulation, cap connection, and top plate |
| Stainless steel liner – two-story or long run | $3,200 – $5,800 | Full-height liner run, insulation wrap, fittings, and terminations |
| HeatShield flue resurfacing | $1,600 – $3,200 | Resurfacing a cracked clay tile flue from the inside, restoring a usable flue without full relining |
| Partial rebuild (top few courses and crown) | $2,800 – $5,500 | Removing and rebuilding deteriorated upper masonry, new crown, and flashing work |
| Full chimney rebuild above the roofline | $6,500 – $12,000+ | Complete tear-down and rebuild of the stack above the roof deck |
| Crown replacement | $600 – $1,400 | New poured or formed crown with proper overhang and bond break |
| Chimney cap installation (Gelco or Famco) | $350 – $850 | Stainless or multi-flue cap with a spark screen |
| Chase cover replacement | $700 – $1,800 | New chase cover sized and sealed to a factory-built chimney |
| Pre-repair sweep and inspection | $180 – $400 | Cleaning the flue and a certified-level camera inspection before any repair work |
What pushes a job to the top of a range is almost always access and condition. A long, straight flue is easier to line than one with offsets, and a roof with a steep pitch or a tight setback takes longer to work on safely. When we find failed clay tile, water damage behind the flashing, or a crown that’s pulling away from the stack, that adds masonry scope. Factory-built chimneys sometimes need an Olympia Chimney liner system or a different termination, and oil or gas furnace flues are sized and rated differently than a wood-burning fireplace flue – those details move the number too. The products we install come from professional-tier lines: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. We use what professionals specify because liners and caps are only as good as the materials behind them.
What Affects Chimney Liner & Rebuild Pricing in Spokane Valley
- Flue height and roof access. A taller flue means more liner material and more time on the roof. A steep or hard-to-reach roof on the valley’s hillside properties adds setup time. These are the two factors we weigh first.
- The condition of the existing flue. A clay tile flue with a few cracks can sometimes be resurfaced with HeatShield instead of fully relined, which saves money. A flue with spalling tile or gaps that have opened up usually means a full liner.
- Freeze-thaw damage to the masonry. Spokane Valley winters freeze and thaw repeatedly, and that cycle is what cracks crowns, opens mortar joints, and pops brick faces. The more of that a chimney has, the more rebuild work it needs.
- Appliance type. A wood-burning fireplace, a gas insert, and an oil or gas furnace flue each need a correctly sized and rated liner. Furnace flues and inserts are often the trickier sizing job, and that’s where a proper inspection pays off.
- Chimney style and dimensions. A wide, oversized interior flue needs more material. A factory-built chimney with a chase cover needs different components than a masonry stack.
- Water intrusion. A missing cap, a failed crown, or bad flashing lets water in, and water is the leading cause of major masonry failure. Catching it early keeps a liner or crown job from turning into a full rebuild.
Liner Replacement or Rebuild: Which Does Your Chimney Need?
This is the question that decides the price, and it’s why we inspect before we recommend anything. If the exterior masonry is sound and the flue is the only problem, a liner or HeatShield resurfacing is usually the right call. If the brickwork above the roofline has gone soft, if the crown is separating, or if the top few courses are crumbling, then a liner on top of a failing stack is money spent on the wrong fix. The rebuild comes first, and the liner goes in after.
Here’s how it usually breaks down in practice. A chimney that’s lost its crown and has a cracked flue is a partial rebuild plus a liner. A chimney with a sound exterior but a flue that’s been spalling tile for years is a liner or resurfacing job. A chimney that’s been leaking for a long time, with freeze damage through the upper courses, is the full rebuild category. We make that call from the camera inspection and from what we can see and feel on the roof, and we tell you plainly which category yours falls into. No upselling guesswork.
Why We Use DuraFlex and HeatShield on Spokane Valley Chimneys
Liner and rebuild work is where a chimney company’s material choices show. The liners we install are DuraFlex systems – stainless steel liner runs built for wood, gas, and oil appliance venting, sized to the flue and insulated to keep the flue temperature where it needs to be. They’re what a lot of certified chimney specialists across the country specify, and they’re what we trust on a Spokane Valley roof that’s going to see a hard winter.
For flues that can be restored rather than fully relined, we use HeatShield. It’s an inside-the-flue resurfacing system that repairs cracks and gaps in clay tile and reseals the flue, and it’s a real alternative to relining when the tile is still structurally there. A lot of sweep-only companies can’t offer that, and that’s part of why we carry it: it lets us give you the least invasive fix that actually solves the problem. On the top end, caps, chase covers, and venting components come from Gelco and Famco. From sweep to repair, it’s handled by the same team, so you’re not handed off to a second contractor halfway through the job.
If you’re still getting to know us, start with Bellmont Chimney Sweep and see how the three services (sweeping, inspection, and repair) fit together. A clean chimney is the starting point, not the finish line.
How Much Does a Chimney Liner Cost in Spokane Valley?
A stainless steel chimney liner in Spokane Valley typically costs $2,200 to $5,800 installed, with most single-story wood-burning fireplace jobs landing in the $2,200-$3,400 range. The price includes the DuraFlex liner, insulation, a top plate, and the connection to your appliance or fireplace. Longer runs, two-story flues, and furnace flues tend to push toward the upper end of that range. Call (844) 734-4138 for an exact quote on your flue – estimates are free.
How Much Does a Chimney Rebuild Cost in Spokane Valley?
A chimney rebuild in Spokane Valley typically costs $2,800 to $5,500 for a partial rebuild of the upper masonry and crown, and $6,500 to $12,000+ for a full rebuild above the roofline. The big variable is how much of the stack has to come down. If the damage is confined to the top few courses and the crown, the partial rebuild handles it. If the mortar joints through the middle of the stack have gone or the brick faces are spalling, the whole above-roof section has to be rebuilt. Both categories get a proper crown and flashing at the end, because that’s what protects the new masonry. Call (844) 734-4138 for a free estimate.
Is It Cheaper to Repair or Replace a Chimney Liner?
Resurfacing is cheaper than replacing a liner when your flue qualifies for it – a HeatShield resurfacing job typically runs $1,600 to $3,200 versus $2,200 to $5,800 for a full stainless liner. But it’s only the cheaper option if the clay tile is still sound enough to resurface. When tile is spalling or gaps have opened, resurfacing won’t hold, and the liner is the correct fix. The inspection tells you which one you’re in. Call (844) 734-4138 for a free estimate and a straight answer.
How to Save on Chimney Liner & Rebuild
The biggest savings on a liner or rebuild come from timing, not haggling. A few things that actually help:
- Fix water problems before they spread. A cap install or a crown repair now is a fraction of a rebuild later. Water intrusion is the number one driver of major masonry failure in this climate, so getting the crown and cap right is the cheapest insurance there is.
- Inspect before you commit. A certified-level inspection with a camera tells you whether you need a liner or a rebuild, and doing it before work starts keeps you from paying for something you don’t need. We inspect before we recommend.
- Bundle the small stuff with the big job. If the chimney is already being worked on, adding a cap, chase cover, or crown at the same time saves on separate visits.
- Ask about resurfacing first. If your flue qualifies for HeatShield, that’s a real savings over a full reline.
- Get a written estimate before any work begins. It sets the final price, so there are no surprises when the job’s done.
The estimate is free. Call (844) 734-4138 and we’ll get eyes on the chimney.
What to Expect from the Estimate
We don’t price from a photo or a phone description. For a liner or rebuild decision, we want to sweep the flue, run a camera, and look at the crown, cap, flashing, and upper masonry. That’s what lets us tell you the difference between a $1,800 crown-and-cap job and a $7,000 rebuild. The estimate you get in writing is what sets the price – we don’t quote one number and bill another. Our technicians have up to experience, and the same team that inspects is the team that repairs. That’s the single-company accountability piece, and it’s why we don’t hand you off to a separate masonry contractor mid-project.
If you’re in the middle of the valley and trying to figure out where to start, the Spokane Valley service area page is a good place to see how we handle Spokane Valley jobs from first call to final inspection.
FAQs – Chimney Liner & Rebuild Cost
How much does chimney liner replacement cost in Spokane Valley?
Chimney liner replacement in Spokane Valley typically costs $2,200 to $5,800 installed, depending on flue height, appliance type, and liner material. A single-story wood-burning fireplace flue usually lands toward the lower end; long furnace flues and two-story runs push toward the top. Call (844) 734-4138 for an exact quote – estimates are free.
How much does a chimney rebuild cost in Spokane Valley?
A chimney rebuild in Spokane Valley runs about $2,800 to $5,500 for a partial rebuild of the upper masonry and crown, and $6,500 to $12,000+ for a full above-roof rebuild. The amount of masonry that has to come down is the main driver. Call (844) 734-4138 for a free estimate.
Is it cheaper to repair or replace a chimney liner?
Repairing with HeatShield resurfacing typically costs $1,600 to $3,200, compared with $2,200 to $5,800 for a full DuraFlex liner installation. Resurfacing is only cheaper when the clay tile can still be restored. If the tile is spalling or has gaps, the liner is the right call. Call (844) 734-4138 for a free inspection and a straight answer.
What causes chimney damage in Spokane Valley?
The leading causes here are freeze-thaw cycling in winter and water intrusion through failed crowns, caps, and flashing. Those two factors account for most of the rebuild work we see. A crown or cap replacement at $350-$1,400 now is a fraction of a rebuild later. Call (844) 734-4138 for a free estimate.
Can you come today?
Same-day service is often possible – call (844) 734-4138 and we’ll book you. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Estimates are free.
Do you offer a free estimate on liner and rebuild work?
Yes. Every liner and rebuild estimate is free. We sweep, inspect with a camera, and write up the findings and the price before any work starts. Call (844) 734-4138. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Get a Free Liner or Rebuild Estimate in Spokane Valley
If your chimney needs a liner, a rebuild, or just a straight answer about which one it is, call (844) 734-4138. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll sweep, inspect, and give you a written estimate that sets the price – no upselling guesswork, no handoff to a second contractor. From sweep to repair, it’s handled by the same team.
Pricing reflects the Spokane Valley market as of 2026. Bellmont Chimney Sweep offers free estimates – call (844) 734-4138.
Written by the team at Bellmont Chimney Sweep.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jennifer Delaney"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Danielle Parker"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Jodi Vaughn