Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Spokane Valley?
Chimney repair in Spokane Valley typically runs $350 to $2,800, with most common fixes landing between $450 and $1,200. A crown repair or cap replacement sits at the low end, while a full flue reline or a rebuild of the chimney above the roofline pushes toward the top. The exact number depends on what we find during the inspection, and a written estimate sets the final price before any work begins.
We’re the team at Bellmont Chimney Sweep, and we handle sweeping, inspection, and repair under one company. That matters here because the technician who diagnoses the problem is part of the same team that fixes it. No handoff to a second contractor, no finger-pointing between vendors. We inspect before we recommend, and we use professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, the same product lines certified chimney specialists specify across the country.
Call (844) 734-4138 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most Spokane Valley chimney repairs land between $450 and $1,200; bigger jobs like relining run higher.
- Repair prices depend on what’s actually failing: crown, cap, flashing, flue liner, masonry, or the firebox.
- Our technicians have up to 13 years of experience, and estimates are free.
- Sweep, inspection, and repair come from one company, so a diagnosis doesn’t get lost between contractors.
- Written estimates set the final price, and every job is priced per job, not by a menu.
Chimney Repair Cost Breakdown (2026)
Here’s what the main repair categories typically run in the Spokane Valley market. These are estimated ranges for the work itself, and the written estimate confirms your number after we’ve been on the roof and looked inside the flue.
| Repair Type | Typical Range | What It Involves |
|---|---|---|
| Crown repair or rebuild | $350 – $900 | Sealing or replacing the concrete crown at the top of the chimney |
| Chimney cap replacement | $200 – $550 | New cap and screen to keep water, birds, and debris out |
| Flue tile repair | $500 – $1,500 | Repairing cracked or spalling clay tiles, sometimes spot relining |
| Full flue relining (stainless) | $1,800 – $4,500 | DuraFlex liner sized to the appliance, insulated where needed |
| HeatShield resurfacing | $1,200 – $2,800 | Resurfacing a damaged flue with HeatShield to restore the liner |
| Masonry repair and tuckpointing | $600 – $2,000 | Repointing mortar joints, replacing spalled brick |
| Chimney rebuild above roofline | $3,500 – $8,000+ | Rebuilding the portion above the roof when the structure has failed |
| Chase cover replacement | $400 – $1,200 | New Gelco or Famco chase cover on a framed chimney chase |
| Waterproofing | $300 – $700 | Vapor-permeable sealant on masonry to slow water intrusion |
| Damper or firebox repair | $250 – $900 | Damper replacement or firebox brick and mortar repair |
What drives cost up or down comes down to a few things. The height of the chimney and how steep the roof is affects how much staging or ladder work the job needs. Whether the problem is at the top (crown, cap, top course) or deeper inside the flue changes the scope completely. A surface crack on the crown is a quick fix; a failed flue liner on a wood-burning fireplace that now needs a full DuraFlex reline is a whole different job. Material choice matters too, which is why we specify named brands like DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield rather than whatever the hardware store stocks. Cheap unbranded parts and cheap unbranded labor both show up again in a few winters.
What Affects Chimney Repair Pricing in Spokane Valley
- Spokane Valley winters. The freeze-thaw cycle here is brutal on masonry. Water soaks into brick and mortar during the wet months, freezes overnight, expands, and pops the surface off. That’s why chimney crowns and mortar joints in Spokane Valley fail faster than in milder climates, and why waterproofing and crown repair come up often.
- The type of appliance. A wood-burning fireplace needs a properly sized flue liner rated for solid fuel. A gas insert or gas furnace flue needs a liner rated for that appliance. Getting the liner type wrong is a common reason a chimney gets flagged on inspection, and correcting it means the right DuraFlex liner for the job.
- Local housing stock. Spokane Valley has a lot of older masonry chimneys alongside newer framed chase construction. Masonry chimneys show wear in the mortar and crown; framed chases tend to have issues with the chase cover and the venting components. Each one has a different repair path and a different price.
- Extent of damage found on inspection. Surface-level problems (a cracked crown, a worn cap) stay on the low end. Structural problems (a failed liner, spalled brick, a leaning chimney) move into the higher ranges. We inspect before we recommend, so the estimate reflects what’s actually there.
- Access and roof pitch. A steep roof or a chimney set back from the ridge requires more careful access. That adds labor time to the job, and labor is the largest slice of most repair estimates.
- Material grade. Professional-grade components from recognized suppliers cost more up front than generic parts, but they’re what the trade specifies for durability. We use DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because they’re the materials a certified specialist would put in.
Can you repair a chimney without a full rebuild?
Yes, most chimney repairs in Spokane Valley don’t require a full rebuild. Crown repair, cap replacement, tuckpointing, and spot flue repair all address specific failures without tearing down the chimney. A full rebuild usually only comes up when the masonry above the roofline has structurally failed and can’t be stabilized with targeted repair.
The deciding factor is the inspection. We look at the flue, the crown, the cap, the flashing, and the masonry, then tell you plainly which category your chimney falls into. Sometimes a resurfacing application with HeatShield restores a flue liner that looks bad but is repairable. Sometimes a liner has failed enough that a Duline reline is the right call. We won’t recommend a rebuild when a repair will hold, and we won’t patch something that needs replacing. Call (844) 734-4138 for a free estimate, and we’ll give you a straight answer.
How to Save on Chimney Repair
The cheapest chimney repair is the one you catch early. Small problems here get worse through every freeze-thaw cycle, so a $350 crown repair now can head off a masonry rebuild later. A few practical ways to keep costs down:
- Get the inspection first. A clear diagnosis up front means you’re paying for the right repair, not a guess. We inspect before we recommend, so the estimate is based on what’s actually failing.
- Deal with water intrusion early. Watch for water staining inside the firebox, crumbling mortar on the exterior, or a rusty damper. Those are signs water is getting in, and catching them before winter saves real money.
- Fix the crown before it fails completely. A cracked crown lets water into the masonry below. Sealing or rebuilding it while it’s still a small job keeps it from turning into a masonry problem.
- Keep up with sweeping. Regular sweeping and inspection catch liner damage and creosote buildup before they turn into repair bills. A clean chimney is the starting point, not the finish line.
- Ask for the estimate in writing. Every job is priced per job by the written estimate, so you know the number before work starts. Estimates are free.
When you’re ready, call (844) 734-4138. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday.
Is it cheaper to repair or replace a chimney in Spokane Valley?
Repair is almost always cheaper than replacement when the chimney structure is sound. A crown, cap, or masonry repair typically runs $350 to $2,000, while a full rebuild above the roofline starts around $3,500 and can climb past $8,000 on a larger masonry chimney. The question is whether the structure itself has failed or whether it’s a component problem.
If the flue liner has failed but the masonry is intact, a DuraFlex reline or HeatShield resurfacing restores the chimney without tearing anything down. If the masonry above the roofline has spalled, leaned, or lost structural integrity, a rebuild is the honest answer. We tell you which one you’re looking at after we’ve inspected. Call (844) 734-4138 for a free estimate.
Do I need a chimney inspection before repair?
Yes, an inspection comes first on every repair. The inspection tells us where the failure is, how far it extends, and what material or system will fix it. Without that, any number is a guess, and guesses are how homeowners end up paying twice. Inspection on a wood-burning chimney covers the flue, the firebox, the crown, the cap, and the exterior masonry, and it’s how we decide whether a repair, a resurfacing with HeatShield, a reline with DuraFlex, or a masonry fix is the right path.
We handle sweeping, inspection, and repair as one integrated service, so the same company that inspects the problem also does the work. That’s single-company accountability, and it’s why we don’t hand off mid-project. Call (844) 734-4138 to book a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why does Spokane Valley weather make chimney repair more common?
The freeze-thaw cycle is the main reason chimney repair comes up so often in Spokane Valley. Water gets into brick and mortar during the wet months, freezes overnight when temperatures drop, expands as it turns to ice, and cracks the surface. Repeated over a winter, that cycle breaks down mortar joints and pops the faces off brick. It’s why crowns, mortar, and masonry are frequent repair categories here rather than rare ones.
The fix is usually straightforward once you know what’s failing: repoint the mortar, rebuild or seal the crown, waterproof the masonry with a vapor-permeable sealant. A clean chimney is the starting point, not the finish line. If your chimney hasn’t been looked at in a while, schedule an inspection before the next cold stretch. Call (844) 734-4138 for a free estimate.
Can you repair a chimney and reline the flue in one visit?
Many chimney repairs and relines can be handled in one visit once the inspection is done and the materials are confirmed. A crown repair plus a cap replacement is a single-visit job. A flue reline with DuraFlex or a resurfacing with HeatShield depends on the flue’s condition and the appliance it serves, so the timeline is set by the estimate. We schedule the work and complete it as one job under one company.
Because we handle full flue relining in-house with DuraFlex liner systems, you don’t get referred to a separate contractor for that step. HeatShield application capability means we can address a flue liner that’s repairable without automatically replacing it. Gelco and Famco product familiarity covers cap installation, chase covers, and venting components, so the top-to-bottom work stays with one team. Call (844) 734-4138 for a free estimate.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Spokane Valley?
Most chimney repairs in Spokane Valley run $450 to $1,200, with the full range from about $350 for a crown repair up to $8,000+ for a full above-roof masonry rebuild. Flue relining with DuraFlex typically sits between $1,800 and $4,500, and HeatShield resurfacing between $1,200 and $2,800. Call (844) 734-4138 for an exact quote; estimates are free.
How much does a chimney crown repair cost in Spokane Valley?
Chimney crown repair typically costs $350 to $900. Sealing a minor crack sits at the low end; rebuilding the crown on a larger masonry chimney sits at the high end. Given the freeze-thaw cycles here, repairing the crown early is one of the best ways to prevent water from working into the masonry below. Call (844) 734-4138 for an exact quote; estimates are free.
How much does it cost to reline a chimney in Spokane Valley?
A full stainless flue reline with DuraFlex typically runs $1,800 to $4,500, depending on the chimney’s height, the appliance it serves, and whether insulation is required. HeatShield resurfacing, an alternative when the liner is repairable, runs $1,200 to $2,800. We inspect before we recommend, so you’ll know which one fits your chimney. Call (844) 734-4138 for an exact quote; estimates are free.
Is it cheaper to repair or replace a chimney?
Repair is almost always cheaper. A targeted repair runs $350 to $2,000 in most cases, while a full rebuild above the roofline runs $3,500 to $8,000+. Replacement is only the right call when the masonry structure itself has failed. Most chimneys we inspect need repair, not replacement. Call (844) 734-4138 for an exact quote; estimates are free.
Can you come today?
Same-day service is often possible. Call (844) 734-4138 and we’ll get you on the schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Dispatch is priced per job by the written estimate, and estimates are free.
Pricing reflects the Spokane Valley market as of 2026. Bellmont Chimney Sweep offers free estimates. Call (844) 734-4138.
Written by the team at Bellmont Chimney Sweep.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jennifer Delaney"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Danielle Parker"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Jodi Vaughn