Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Spokane Valley
Chimney problems in Spokane Valley rarely show up as one neat issue. They arrive as smoke backing into a living room on a cold morning, a water stain on the ceiling near the chimney chase, or a wood stove that suddenly won’t draft like it used to. We handle all three services under one roof – chimney sweeping, chimney inspection, and chimney repair – so the technician who finds the problem is part of the same team that fixes it. No hand-offs, no finger-pointing between vendors. Call (844) 734-4138 to get an honest look at what your chimney actually needs.
Why Spokane Valley Homeowners Call Bellmont Chimney Sweep for Chimney Repair
Spokane Valley sits in a high-desert cold-air basin, and that shapes almost everything we do here. Thousands of homes built in the 1960s and ’70s went up with prefab or masonry fireplaces and wood stoves as primary or backup heat. These are working fires, not ambiance. When winter inversions trap cold air in the basin and the power goes out, people burn hard and choke their stoves down overnight to stretch a load of wood. That lays glazed, third-degree creosote that a routine brush can’t touch. It’s the single biggest reason repair calls in Spokane Valley start with flue liner and smoke chamber failures on wood-burning systems rather than decorative gas upkeep.
We use professional-grade repair materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – the same product lines certified chimney specialists specify nationwide. DuraFlex liners and HeatShield resurfacing mean full flue relining and restoration work is available in-house, which many sweep-only outfits around Spokane Valley simply can’t offer. Our technicians have up to 13 years of experience, and we inspect before we recommend anything. If your chimney is sound, we’ll tell you that plainly and skip the sales pitch.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Spokane Valley
Chimney Flashing Repair in Spokane Valley usually comes down to one thing: the metal that seals the chimney-to-roof joint has pulled loose, rusted through, or was never installed correctly on a mid-century ranch. When that seal fails, water runs down the masonry instead of shedding off the roof, and the damage shows up inside as ceiling stains or crumbling mortar long before you see it from the ground. A typical flashing repair in Spokane Valley runs $250-$650 depending on roof pitch, chimney location, and whether the step and counter-flashing both need rebuilding. We work the repair around the existing shingles so you’re not paying for a full re-roof.
What We Check Before We Quote
We inspect the flashing at the roof line, the counter-flashing embedded in the mortar joints, and the condition of the shingles immediately around the chimney. If water has already reached the masonry, we look for spalling brick and saturated mortar before recommending any repair. The written estimate covers what we actually find, not a guess from the driveway.
Why Valley Roofs Take a Beating Here
Seasonal winds across the Spokane Valley basin work loose fasteners and lift flashing edges over time, and spring snowmelt finds every gap. That freeze-and-thaw cycle is hard on the joint where metal meets masonry. Catching flashing failure early is far cheaper than repairing the water damage it causes.
Chimney Crown Repair in Spokane Valley
Chimney Crown Repair in Spokane Valley often starts with a crown that has cracked, spalled, or pulled away from the flue. The crown is the concrete cap on top of the chimney, and when it fails, water runs straight down into the masonry, the smoke chamber, and the flue. On the exterior masonry chimneys common in Valley ranch homes, a failing crown and water intrusion typically show up together, not as separate problems. A typical crown repair in Spokane Valley runs $350-$900, and a full crown rebuild with a proper overhang and bond break runs $600-$1,400 depending on the chimney’s size and how much of the old crown has to be removed.
Cracked Crown, Wet Masonry
Hairline cracks in the crown let water in every rain and snowmelt, and freeze-thaw cycles widen them year after year. We repair the crown and address the waterproofing that protects the masonry below it, so the fix holds through Spokane Valley winters instead of failing again by spring.
When a Crown Isn’t Worth Patching
If the crown is more crack than concrete, or the top courses of brick are loose and spalling, patching won’t last. In those cases we quote a crown rebuild and walk you through why. You see the photos before you decide.
Trusted Brands We Service in Spokane Valley
Repair materials make or break a chimney fix, and we’re specific about what goes into your chimney. We work with DuraFlex for stainless liner systems, HeatShield for flue resurfacing and restoration, and Famco and Copperfield for caps, chase covers, and venting components. These are professional-tier product lines, not whatever’s on the shelf at the hardware store. We don’t claim to stock parts locally or run a warehouse – what matters is that we specify the right material for your chimney and get it installed correctly. That means fast turnaround on common repairs and a fix built to last through Spokane Valley’s cold, inversion-trapping winters.
Common Chimney Repair Problems We See in Spokane Valley Homes
- Cracked clay-tile flues in mid-century ranches. Original clay-tile liners in 1960s and ’70s Spokane Valley homes crack at the joints after decades of heavy wood-stove use. That lets creosote and moisture reach the surrounding masonry, where they quietly do damage until a draft problem or smoke backup forces the issue.
- Third-degree glazed creosote in the smoke chamber. Choked-down overnight burns in the cold basin produce a hard, tar-like glaze that a brush can’t remove. It eats into the liner and raises chimney-fire risk, which is why a routine sweep sometimes isn’t enough to make the flue safe.
- Spalling brick and water intrusion at the crown and flashing. Exterior masonry chimneys weather at the top, and Valley freeze-thaw cycles speed that up. Water gets in at the crown or flashing, spalls the brick, and shows up as draft trouble rather than an obvious leak.
- Wood stoves and inserts venting into stacks never designed for them. Many older Valley homes have upgraded appliances feeding the original undersized or unlined flue. Draft suffers, smoke backs into the room, and the fix is usually relining to modern standards, not another sweep.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Spokane Valley, WA
We quote per job, and the written estimate sets the final price. Here’s what common chimney repairs in Spokane Valley typically run so you can plan before you call:
- Mortar repointing and tuckpointing: typically $400-$1,200 depending on how much of the stack needs work.
- Spalling brick repair: typically $300-$900 for localized repairs.
- Chimney waterproofing: typically $250-$600.
- Flashing repair: typically $250-$650.
- Crown repair: typically $350-$900; a full crown rebuild runs $600-$1,400.
- Chimney rebuilding: typically $2,500-$7,000 for a partial or full rebuild.
- Flue relining: typically $1,800-$4,500 depending on liner type and flue length.
What pushes a job toward the higher end is extent of damage, chimney height and access, and whether the flue needs relining alongside the exterior repair. The estimate is free, and the inspection and camera report that back it up are included. Nothing is recommended without camera evidence you can see for yourself – and if a repair can safely wait, we’ll say so.
We Also Serve Cities Near Spokane Valley
Our chimney repair team covers the communities around Spokane Valley, including Otis Orchards-East Farms, Liberty Lake, Mead, and Country Homes. Whether you’re in a newer east-side subdivision or an older ranch closer in, the process is the same: sweep, inspect, and repair by the same team. See our full chimney repair services for what we handle from diagnosis through lasting fix.
Serving Spokane Valley, WA – Our Local Coverage Area
We serve Spokane Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Spokane Valley
Often yes, but not automatically. Original clay-tile flues in Valley ranch homes crack at the joints after decades of hard wood-stove use, and a cracked or eroded liner can’t safely contain creosote or combustion gases. The only honest way to know is a camera inspection that shows the condition of the tiles and joints on-screen. If the liner is sound, you don’t need relining. If it isn’t, a HeatShield or DuraFlex liner brings it to modern standards. Call (844) 734-4138 for a free estimate.
Third-degree creosote is a hard, glazed, tar-like coating that looks almost like a baked-on shell in the flue and smoke chamber – not the fluffy soot a brush removes. A normal sweep can’t get it out. It forms when stoves are choked down for slow overnight burns, exactly what happens in the Spokane Valley basin on cold nights. Removing it takes chemical treatment or liner work. Call (844) 734-4138 for a free estimate.
Ask to see the camera footage before you agree to anything. Any recommendation we make is backed by photos or video of the actual defect – the cracked tile, the spalling mortar, the failed flashing – so you can judge it yourself. We inspect before we recommend, and if a repair can safely wait, we tell you. Call (844) 734-4138 for a free estimate.
Cold air pooled in the basin creates a stronger downdraft, and a marginal flue or one venting into a stack never designed for the appliance can’t overcome it. Often the cause is a flue that’s cracked, undersized, or not lined to modern standards. A Level 2 inspection with a camera finds the reason. Call (844) 734-4138 for a free estimate.
Yes, and occasional burners sometimes need it more, because slow, smoldering fires are what build glazed creosote. An annual inspection catches liner cracks, flashing and crown failures, and creosote buildup before they turn into a chimney fire or a water-damage repair. We answer 24/7. Call (844) 734-4138 for a free estimate; fast dispatch from 7am to 7pm, Sunday through Friday.
What a Chimney Repair Call Usually Involves
In many 1960s and ’70s Spokane Valley ranch homes, the original clay-tile flue has cracked or the mortar joints have eroded, so a wood stove or insert is venting into a stack never designed for it. Draft suffers, or smoke backs into the room. A qualified local technician typically runs a Level 2 inspection with a camera, shows the homeowner the spalling mortar or failed liner on-screen, and recommends relining to modern standards – often a HeatShield or DuraFlex liner – along with crown or flashing repairs where the exterior masonry has taken weather. You see the evidence before you commit to a fix.
Schedule Chimney Repair in Spokane Valley
Whether it’s a flashing leak, a cracked crown, or a wood stove that won’t draft, we’ll sweep, inspect, and repair it under one company so you never get handed off mid-project. The estimate is free, the camera report is yours to keep, and the written estimate sets the final price. Call (844) 734-4138. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Bellmont Chimney Sweep.